[users] ushare centos 5.5 with xbox360

Fedora Linux 64 fedora.linux.64 at gmail.com
Sun Jan 16 22:27:57 CET 2011


On Fri, Jan 14, 2011 at 9:42 PM, Fedora Linux 64
<fedora.linux.64 at gmail.com>wrote:

>
>
> 2011/1/14 fakessh @ <fakessh at fakessh.eu>
>
> I meant the PS3 support
>>
>> and other game computer
>> also
>>
>>
>> Le vendredi 14 janvier 2011 à 21:16 -0500, Fedora Linux 64 a écrit :
>> >
>> >
>> > On Fri, Jan 14, 2011 at 8:58 PM, fakessh @ <fakessh at fakessh.eu> wrote:
>> >         -----BEGIN PGP SIGNED MESSAGE-----
>> >         Hash: SHA1
>> >
>> >         Le 15.01.2011 02:18, Fedora Linux 64 a écrit :
>> >         > Hello
>> >         > I am using centos 5.5, I am trying to get ushare working
>> >         with xbox360.
>> >         >
>> >         > I have installed:
>> >         > ushare-1.1a-3.el5.rf
>> >         >
>> >         > I have selinux:
>> >         > disabled
>> >         >
>> >         > I have turned off iptables
>> >         > and setup the ushare.conf
>> >         >
>> >         > I have ushare working on my fedora box with the same config
>> >         > with the default port 49200
>> >         > When I try to use ushare on the centos box I have ushare
>> >         stopped on the
>> >         > fedora box.
>> >         >
>> >         > for some reason I can not get ushare working with the
>> >         xbox360
>> >         > ushare does not show up on the xbox360 from the centos box
>> >         >
>> >
>> >         > [root at Harley-D <mailto:root at Harley-D> ~]# service ushare
>> >         restart
>> >         > Shutting down UPnP Media Server (ushare): [ OK ]
>> >         > Starting UPnP Media Server (ushare): [ OK ]
>> >         >
>> >         >
>> >         > suggestions or ideas?
>> >         >
>> >         >
>> >         >
>> >
>> >         > _______________________________________________
>> >         > users mailing list
>> >         > users at lists.rpmforge.net
>> >         > http://lists.rpmforge.net/mailman/listinfo/users
>> >         i use PS3 primus model with the ardware for the cross
>> >         interpolating of
>> >         games ( ps1 / ps2 / ps3 my model support all )
>> >         i use yellowdoglinux with the last comprehensible firmware
>> >         its the same a suck suppercalculating i already calculate the
>> >         permutation a games tv simply
>> >
>> >         nb : <anonymous>
>> >         -----BEGIN PGP SIGNATURE-----
>> >         Version: GnuPG v1.4.5 (GNU/Linux)
>> >         Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org/
>> >
>> >         iD8DBQFNMP9gtXI/OwkhZKcRAg40AJ0ULtKX8dkW1Bj
>> >         +MIbHUVDeNWYOsACfbYTQ
>> >         R52+arxyEkVoTQEn5tu2YTw=
>> >         =218E
>> >         -----END PGP SIGNATURE-----
>> >         _______________________________________________
>> >         users mailing list
>> >         users at lists.rpmforge.net
>> >         http://lists.rpmforge.net/mailman/listinfo/users
>> >
>> > hello,
>> > what does that have to do with ushare?
>> > thanks
>> > _______________________________________________
>> > users mailing list
>> > users at lists.rpmforge.net
>> > http://lists.rpmforge.net/mailman/listinfo/users
>> --
>> gpg --keyserver pgp.mit.edu --recv-key 092164A7
>> http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x092164A7
>>
>> _______________________________________________
>> users mailing list
>> users at lists.rpmforge.net
>> http://lists.rpmforge.net/mailman/listinfo/users
>>
>> ok but I use ushare in linux to share my media:
> movies/music/pictures
> to my xbox360
> not games
> thanks
>
>

little more info on ushare, I have it setup to run on eth0, but when I try
ushare it says this:

root at harley ~]# ushare
uShare (version 1.1a), a lightweight UPnP A/V and DLNA Media Server.
Benjamin Zores (C) 2005-2007, for GeeXboX Team.
See http://ushare.geexbox.org/ for updates.
bind: Address already in use
[root at harley ~]# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:0F:1F:A0:FC:3E
          inet addr:192.168.1.28  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::20f:1fff:fea0:fc3e/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3748108 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1999311 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:119335688 (113.8 MiB)  TX bytes:1939368811 (1.8 GiB)
          Interrupt:11

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:317 errors:0 dropped:0 overruns:0 frame:0
          TX packets:317 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:40802 (39.8 KiB)  TX bytes:40802 (39.8 KiB)

wlan1     Link encap:Ethernet  HWaddr 00:11:50:70:9F:6C
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

[root at harley ~]# ping google.com
PING google.com (72.14.204.103) 56(84) bytes of data.
64 bytes from iad04s01-in-f103.1e100.net (72.14.204.103): icmp_seq=1 ttl=51
time=29.0 ms
64 bytes from iad04s01-in-f103.1e100.net (72.14.204.103): icmp_seq=2 ttl=51
time=35.5 ms
^C
--- google.com ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1267ms
rtt min/avg/max/mdev = 29.073/32.329/35.585/3.256 ms



ushare.conf:
[root at harley ~]# cat /etc/ushare.conf
# /etc/ushare.conf
# Configuration file for uShare

# uShare UPnP Friendly Name (default is 'uShare').
USHARE_NAME=Fedora.Harley-Laptop

# Interface to listen to (default is eth0).
# Ex : USHARE_IFACE=eth1
USHARE_IFACE=eth0

# Port to listen to (default is random from IANA Dynamic Ports range)
# Ex : USHARE_PORT=49200
USHARE_PORT=49200

# Port to listen for Telnet connections
# Ex : USHARE_TELNET_PORT=1337
USHARE_TELNET_PORT=

# Directories to be shared (space or CSV list).
# Ex: USHARE_DIR=/dir1,/dir2
USHARE_DIR=/media/nfs.640gig/Media/

# Use to override what happens when iconv fails to parse a file name.
# The default uShare behaviour is to not add the entry in the media list
# This option overrides that behaviour and adds the non-iconv'ed string into
# the media list, with the assumption that the renderer will be able to
# handle it. Devices like Noxon 2 have no problem with strings being passed
# as is. (Umlauts for all!)
#
# Options are TRUE/YES/1 for override and anything else for default
behaviour
USHARE_OVERRIDE_ICONV_ERR=

# Enable Web interface (yes/no)
USHARE_ENABLE_WEB=no

# Enable Telnet control interface (yes/no)
USHARE_ENABLE_TELNET=

# Use XboX 360 compatibility mode (yes/no)
USHARE_ENABLE_XBOX=yes

# Use DLNA profile (yes/no)
# This is needed for PlayStation3 to work (among other devices)
USHARE_ENABLE_DLNA=
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.repoforge.org/pipermail/users/attachments/20110116/6b23796a/attachment-0004.html>


More information about the users mailing list